Loading Events

« All Events

  • This event has passed.

Brazing Certification Testing

April 30 @ 8:00 am - 12:00 pm

We shall continue to exercise caution with the size of classes for the Brazing written portion of the test.

We shall be testing on the hour.

Classes will be held at 8:00AM, 9:00AM and 10:00AM on a first come first serve basis

Testing is scheduled with an approximate two hour period for the written and practical portion of the test. All brazing certification applicants are required to supply their own equipment following is a list of the equipment required.

The student will be required to supply the torch set, either oxy-acetylene or air-acetylene (i.e. “B”tank), with appropriate sized torch to achieve temperatures of 1000 to 1500 degrees F. (no propane or MAPP torch sets permitted), cleaning materials, such as scotch brite or plumbers tape, measuring tape, tubing cutter, reaming tool and tubing brush for 3/4” size tubing, plus safety equipment, which should include goggles and gloves. ORACCA will supply the tubing, fittings, test fixtures and 15% brazing alloy..

The link for the course study guide for the written portion of the Brazing Certification test will be sent, upon registration. The written test is comprised of a 40 question, multiple choice test. The answers to the test are contained in the study material, so if you don’t study, you may not pass. Please spend time going over the study material. Do not expect to walk in and pass the test. The odds are against it. We send this information so that you can prepare for the material involved with the actual test.

Mar-Hy Facility
3850 SE International Way
Milwaukie, OR 97222 



April 30
8:00 am - 12:00 pm
Event Category:


Mar-Hy Facility
3850 SE International Way
Milwaukie, OR 97222 United States
+ Google Map